top of page
Search

Squash Court Lighting Guide: Lux, LEDs and Requirements

Nov 6
6 min read

Updated: 2 days ago

Quick Summary

The best squash court lighting uses even, glare-free LED fixtures that deliver at least 300 lux, with 500 to 750 lux recommended for sports halls. Avoid windows and roof lights, since they cause glare and uneven light. Choose 4000K to 5000K colour temperature so the ball stands out clearly against the walls.

  • World Squash sets a minimum of 300 lux, measured one metre above the floor.

  • Recommended illuminance for squash halls sits in the range of 500 to 750 lux.

  • Windows and roof lights are unacceptable because they cause glare and inconsistent light.

  • LED fixtures are now the preferred option, replacing metal halide, fluorescent and HPS lamps.

  • Total Squash Court recommends a colour temperature between 4000K and 5000K.

Table of Contents

Why Lighting Decides the Quality of Your Game

Last Updated: November 5, 2026

Good lighting is the difference between a squash court you can read and one that quietly costs you points. Players can lose track of a fast ball on a dim back wall more often than most people expect. Court lighting shapes how well you see the ball, how safely you move, and how confident you feel swinging. Squash court lighting is a technical subject, but the goal is simple: give every player an even, glare-free view of the whole court.

The minimum standard is clear. World Squash sets a floor of 300 lux measured at one metre above the floor, and many facilities aim well above that World Squash Federation Court Specification Rule 11. Lighting that only just meets the minimum can still leave the front wall and corners looking flat.

If you are checking a court before a match, start with the basics below. Then look at the numbers, the fixture choices and the layout details that make the difference on the day.

Squash Court Lighting Requirements to Check First

Squash court lighting requirements focus on three things: brightness, evenness and freedom from glare. Brightness is measured in lux, and the playing area should be lit consistently from corner to corner. Glare from windows or exposed fittings can hide the ball against a light background, so it is treated as a fault.

Natural light is not a good option for competitive play. England Squash notes that windows and roof lights are unacceptable because they cause glare and inconsistent light across the day England Squash Technical Information Sheet. Artificial lighting gives you control over the result, which is why it is the standard.

When you walk into a court, check three things:

  • The front wall is evenly lit, with no dark patches near the corners

  • No fitting or window reflects into your eyes during a rally

  • The ball stays visible against both the front wall and the back wall

Squash Court Lux Levels: What the Numbers Mean

A lux reading tells you how much light reaches the court surface. Recommended illuminance for squash halls sits in the range of 500 to 750 lux, according to TRILUX's guidance on sports hall lighting TRILUX lighting of squash halls. Squash court lux levels this high make the ball easier to track at speed.

Numbers alone do not tell the whole story. A court can hit its average lux figure and still have dark spots. Uniformity matters as much as brightness, so ask whether the reading was taken at several points, not one.

!Two squash players on a bright indoor court

Two squash players in action on a court with uniform squash court lighting across the front and back walls.

The article gives these lighting figures and what they mean in practice.

Item

Value

Note

World Squash minimum

300 lux

Measured at one metre above the floor

Recommended hall range

500 to 750 lux

Per TRILUX sports hall guidance

Uniformity

Readings at several points

Average lux alone can hide dark spots

Choosing Between LED and Legacy Fixtures

Legacy fixtures such as metal halide, fluorescent and high-pressure sodium lamps still appear in older clubs. They work, but they use more energy and need more maintenance. Most facilities that upgrade choose LED.

LED fixtures are now the preferred option for squash courts because they combine efficiency with instant-on performance. Hishine LED describes LEDs as the preferred replacement for metal halide, fluorescent and HPS lamps for these reasons Hishine LED squash court lighting. Replacing an old system is usually a bigger job than swapping bulbs, so plan the switch with an electrician.

Why LED Lights Suit Squash Courts

LED lights suit squash courts for practical reasons. LED Lighting Supply reports up to 60% energy savings compared with traditional lighting and a lifespan of 50,000 hours or more LED Lighting Supply squash and racquetball lighting. Fewer replacements mean less disruption to bookings.

Energy savings vary with the fixtures and the court, so treat that figure as a guide, not a promise. Ask any supplier for a specification sheet for the exact units you are considering.

Colour Temperature and Impact-Proof Fixtures

Colour temperature affects how the ball shows against the walls. Total Squash Court recommends a range of 4000K to 5000K for bright, natural white light that helps the ball stand out Total Squash Court lighting guide. Warmer light can make the back wall look muddy.

Fixtures also need to survive ball strikes. Facilities are increasingly choosing impact-proof designs to cut maintenance, according to the Squash Facilities Group Squash Facilities Group. Look for impact-resistant covers on any fitting near the play area.

Layout, Glare and Shadow Control

Fitting position decides whether a court is comfortable to play in. Direct lighting can create harsh shadows and glare, and some experts suggest indirect or well-diffused lighting for more even coverage across the court AGC LED on direct and indirect lighting. Ask for a lighting layout plan before any installation.

Shadows on the front wall are the most common complaint.

Booking Your Court and Checking the Lighting Before You Play

Before you book, check the lighting on the court you plan to use, especially for evening sessions. If you want flexible court access, you can book a court at Launceston Squash Centre or view our membership plans. For current prices, see plans and pricing or request a quote from the centre.

For more on venues and access, read our guide to the best squash facilities in Launceston or our overview of self-service squash courts.

Frequently Asked Questions

What lighting is best for an indoor squash court?

Well-designed LED fixtures are the best choice for most indoor squash courts. LEDs provide instant-on light and are a common choice for squash courts. Choose impact-proof luminaires rated for ball strikes, and check that the design avoids glare and stroboscopic flicker. Pricing depends on the number of fixtures, the court layout and installation, so request a quote from a specialist supplier.

How many lux does a squash court need?

Lux levels should be high enough to give players clear sight of the ball against the walls and front wall. Lux levels should be measured across the court, not only at the centre, because uneven light causes players to lose the ball in darker corners. A lighting specialist can take readings with a light meter and confirm that the court meets its target.

Are LED lights suitable for squash courts?

Yes. LED lights are now the preferred replacement for metal halide, fluorescent and high-pressure sodium lamps in squash halls. They reach full brightness instantly, which matters when a court is switched on for a booking, and they run cooler, reducing heat in the playing space. Professional installation is important, because poor placement can cause glare or uneven light distribution even with high-quality fixtures.

What colour temperature is best for squash court lighting?

A colour temperature in the 4000K to 5000K range is commonly used for squash courts. This produces a bright, natural white light that helps players track the ball against light-coloured walls. Lower temperatures can look warm but may reduce contrast on the ball, while very high temperatures can feel harsh over long sessions. Look for fixtures with a colour rendering index of 70 or above, which keeps the court colours accurate and makes the ball and markings easier to distinguish.

 
 
 

Comments


bottom of page